Home » »
Professional Tile Flooring Installation in Cameron Park, CA
Tile is one of the toughest floors you can put in your home. It handles water, heat, and heavy foot traffic better than almost any other material. We install ceramic, porcelain, marble, and wood-look tile for homes across Cameron Park and the Sierra Nevada foothills. Also, we take care of everything. That includes subfloor checks, waterproofing, layout, grouting, and sealing. Every job starts with a free visit to your home. We look at your floors and give you a clear price before any work begins.
- C-15 Licensed
- Fully Insured
- Locally Owned
- Serving El Dorado County & Sacramento
Six Things That Set Our Tile Crew Apart
Finding the right tile contractor matters. A bad install leads to cracked grout, loose tiles, and water damage behind your walls. Here is what makes our team different from the rest.
- C-15 Licensed: We hold a California Contractors State License Board C-15 Flooring and Floor Covering license. This is a trade license just for flooring work. Not every contractor carries it.
- Fully Insured: We carry general liability and workers' compensation insurance. Your home and our crew stay protected on every single job.
- Foothill Home Experience: Cameron Park homes deal with hot dry summers and cold wet winters. We have worked in this climate for over twenty years. We know how these conditions affect tile and subfloors.
- Waterproofing on Every Wet Job: Showers, bathroom floors, and tub surrounds get a full waterproofing system before any tile goes down. No shortcuts.
- One Price, No Surprises: We write a full estimate before we start. Labor, materials, grout, and sealing are all included. You will not see extra charges at the end.
- Grout Sealing Is Part of the Job: Most contractors charge extra for sealing. We include it in every quote because it is part of doing the job right.
Our Tile Flooring Services
We install many types of tile for homes across Cameron Park and El Dorado County. Each service below uses the right materials, tools, and methods for that specific job. Here is what we offer.
A Flat, Dry Base Is What Keeps Your Tile in Place
Most tile problems start below the surface. A soft or uneven subfloor causes tiles to crack at the grout joints. A wet subfloor causes mold, rot, and tiles that pop loose over time. So we always fix the base before we touch the tile.
For plywood subfloors, we install cement backer board sheets to give the thinset a stiff and moisture-resistant surface to bond to. We cut each sheet using a carbide-tipped scoring tool to match the room layout without chipping the board edges. We then fasten the boards following California Residential Code Section R505.2.6, which sets the required fastener spacing for subfloor sheathing in residential construction. This step stops your subfloor from flexing under foot traffic. Also, it stops the grout from cracking within the first few seasons.
Porcelain Tile for Rooms That Get Daily Use
Porcelain is the hardest tile we install. It stands up to pet claws, heavy foot traffic, dropped items, and constant spills without cracking or staining. This makes it the best choice for kitchens, hallways, and open living areas.
We start by mixing and spreading polymer-modified thinset mortar across the prepared floor. Then we use a square-notched mortar trowel to comb the mortar into ridges. These ridges help the tile press into a full bond with no air pockets underneath. We set every tile to meet ANSI A108.02 Section 4.3.8, which is the national standard for tile lippage. Lippage happens when one tile edge sits higher than its neighbor, which creates a tripping hazard. This standard sets the maximum allowed height difference between tiles based on grout joint width. So your floor comes out flat, even, and safe to walk on.
Wood-Look Tile for Pet Owners Who Want the Best of Both
You love the look of hardwood. But you also have dogs that scratch floors and kids who spill drinks. Wood-look porcelain tile solves both problems at once. It copies the grain, color, and texture of real wood planks. Also, it handles water and scratches that would damage real hardwood.
We install porcelain wood-look tile planks in a staggered pattern, just like real hardwood flooring. To keep every plank flat, we use a mechanical tile leveling clip and wedge system during layout. This system locks two tiles together at the same height while the mortar sets. We follow ANSI A108.02 Section 4.3.7 to set the stagger offset on long-format tiles. This standard prevents a pattern called “lippage stacking,” where repeated offsets create ridges across the floor. This means your floor looks like a real wood plank floor but performs like tough, waterproof tile in every room.
Marble, Granite, and Slate for Rooms That Deserve Real Stone
Natural stone adds a look that no factory-made tile can copy. Every marble slab has its own veining. Every piece of granite has its own grain. That is what makes stone floors feel special.
We install marble, granite, slate, and travertine for foyers, master bathrooms, and living rooms. We cut each piece using a continuous-rim diamond blade wet saw to get a clean edge without cracking or chipping the stone face. Next, we set the tiles using the right mortar for stone. We follow California Building Code Title 24 Part 2 Section 2103.2, which sets the standards for masonry mortar mixtures used in building construction. After the grout cures, we apply a penetrating stone impregnator sealer across the full surface. This sealer soaks into the stone pores and blocks water, oil, and acidic liquids from leaving stains. Also, it does not change the look or texture of the stone surface.
Shower and Bathroom Tile That Stops Hidden Water Damage
Bathrooms get more moisture than any other room in your home. Steam, standing water, and daily use all push water through grout lines and tile edges over time. Without a proper waterproof layer behind the tile, that water soaks into your walls and causes rot, mold, and structural damage.
We install a Schluter DITRA uncoupling membrane over the shower floor and wall substrate before any tile goes down. We press the membrane firmly into the thinset mortar using a hard rubber grout float to push the fleece backing into the mortar bed for a full bond. This membrane does three things at once. First, it blocks water from reaching the wood or concrete substrate below. Second, it absorbs small movements between the subfloor and the tile so cracks do not form. Third, it lets moisture vapor escape upward through built-in channels. Every wet area we tile follows California Residential Code Section R702.4, which requires a waterproof barrier behind all tile shower walls, shower floors, tub surrounds, and wet area floors to prevent structural moisture damage.
Tile Floors With Built-In Heat for Cold Foothill Mornings
The tile is naturally cold underfoot. In Cameron Park and the foothills, winter mornings can drop well below 40 degrees. That makes a cold tile bathroom floor uncomfortable. The fix is a radiant heating mat installed between the subfloor and the tile.
We lay an electric radiant floor heating mat across the substrate before the tile goes down. Before we cover it, we test the heating cable resistance using a digital clamp multimeter to confirm the circuit is complete and safe. Next, we embed the mat in the thinset mortar and set the tile directly on top. The system connects to a programmable wall thermostat with a floor temperature sensor. You set a schedule and the floor warms up on its own. All electric radiant heating installations follow California Electrical Code Article 424 Part IX, which covers the safety requirements for fixed electric space heating equipment including embedded floor heating cables and mats.
From Your First Call to the Final Walk-Through
Free Home Visit
We come to your home and check the subfloor for moisture, softness, and flatness. We take room measurements and explain what we find.
Subfloor Leveling
We grind down high spots on concrete and fill low spots with leveling compound. On plywood, we screw down cement backer boards.
Waterproofing
In showers, wet floors, and tub surrounds, we install and test the waterproofing membrane before any tile goes in.
Layout Planning
We snap chalk lines to set the starting point. We dry-fit the first few rows to check the spacing and catch thin edge cuts before they happen.
Tile Setting
We spread mortar with a notched trowel, back-butter large tiles, and press each tile into the mortar bed with leveling clips.
Grouting
We wait 24 hours for the mortar to cure. Then we pack the joints with grout, smooth the surface, and wipe it clean.
Sealing
We apply a penetrating sealer to the grout and to any natural stone tile to block stains and moisture.
Walk-Through
We walk every room with you. We check seams, edges, transitions, and corners. If anything is not right, we fix it before we leave.
Cleanup
We haul out all materials, tools, and packaging. We leave your home the way we found it.
Start Your Tile Project With One Call
Absolutely Floored is a locally owned tile contractor based in Cameron Park. We have worked in foothill homes for over twenty years. Our crew is licensed, insured, and ready to help.
Call (916) 365-4251 to book your free in-home tile inspection. We will check your subfloor, walk you through your tile options, and give you a written price with no hidden fees.
Tile Floors for Homes Across the Sacramento Foothills
We install tile flooring in:
- Cameron Park
- El Dorado Hills
- Shingle Springs
- Rescue
- Placerville
- Diamond Springs
- Folsom
Not sure if we cover your location? Call us at (916) 365-4251 and we will let you know right away.
Tile Questions Cameron Park Homeowners Ask Us
How long does a tile floor project take?
One room usually takes two to four days. A full bathroom with waterproofing and custom cuts takes four to seven days. We give you a clear timeline before we start so you can plan around the work.
What is the difference between ceramic and porcelain?
Both come from clay. Porcelain is fired at a higher temperature, which makes it denser and harder. It absorbs less than 0.5 percent water. Ceramic is lighter and easier to cut. It works well on walls, backsplashes, and dry floors but is not the best pick for wet rooms.
Can you tile over my existing tile floor?
Sometimes yes. If the old tile is firmly bonded, flat, and crack-free, we can tile over it using a bonding agent. If it is hollow-sounding or uneven, it needs to come up first. We check this during your free inspection and give you a straight answer.
Do I need a cement board under tile on a wood floor?
Yes. Cement board gives the mortar and tile a rigid, moisture-resistant surface to bond to on plywood subfloors. On concrete slabs, we may use an uncoupling membrane or apply mortar directly depending on the slab condition.
How much does tile installation cost in Cameron Park?
Most projects run between $8 and $20 per square foot installed. Natural stone and heated floor systems cost more because of the extra materials and time involved. We give free on-site estimates so you know the exact number before any work starts.
Can you install heated tile in a bathroom or kitchen?
Yes. We install electric radiant heating mats under porcelain and ceramic tile in bathrooms, kitchens, basements, and spa rooms. The system connects to a programmable wall thermostat. It adds about $8 to $15 per square foot to the total project cost.
What tile is best inside a shower?
We use porcelain tile on shower walls because it soaks up almost no water. For shower floors, we use small mosaic tiles. Mosaic tiles are small enough to follow the floor slope toward the drain. The grout lines between them also give your feet grip to prevent slipping.
How long does grout need to cure before I can use the floor?
Standard floors need 24 to 72 hours before normal foot traffic. A tiled shower needs a full 72 hours before any water contacts the surface. We apply a sealer to the grout after it cures to protect it from stains and moisture.
Is natural stone tile harder to keep clean?
Yes, compared to porcelain. Stone is porous, so it needs a penetrating sealer after installation and resealing every one to three years. Acidic liquids like vinegar or citrus juice can etch the surface if spills sit too long. We tell you exactly how to care for your stone after we finish the job.
Are you licensed and insured to do tile work in California?
Yes. We hold a California CSLB C-15 Flooring and Floor Covering specialty license. We carry full general liability and workers’ compensation insurance. You can verify our license number directly on the CSLB website.